Elektroforetinis aliuminis yra aliuminio oksidas kaip anodas, įdedamas į vandenyje{0}}tirpų emulsijos tirpalą, veikiant nuolatinei srovei, dirbtinai nusodinamas ant aliuminio oksido plėvelės dengimo plėvelės apsauginio sluoksnio paviršiaus, kad susidarytų elektroforezinis aliuminis.
Pagrindinės aukštos kokybės{0}}elektroforezinio aliuminio savybės:
1. Jis turi stiprų dažų plėvelės kietumą.
2, su didelio sukibimo plėvele, kuri nėra lengva nukristi nuo senėjimo.
3. Jis turi stipresnį atsparumą oro sąlygoms ir atsparumą šarmams nei aliuminio oksidas.
4, paviršiaus spalva sodri, graži, su veidrodiniu -blizgesio efektu.
Elektroforetiniai profiliai yra labiau tinkami naudoti lauke, nacionalinis standartas 70 metų atsparumo oro sąlygoms pagrindinis antrasis nužudo kitas paviršiaus apdorojimas.
Electrophoretic profile packaging materials are mostly used for strong adhesion film as a protective film, aluminum profiles in a protective film for a period of time, the film is torn to find that aluminum profiles have film printing or called watermark. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarks has appeared in almost all aluminum factories, and there are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared.
Film watermarking is a common phenomenon, film such as air separation, and moisture formation, which has been recognized in the industry. Many factories have also done a large number of relevant experiments. There are several considerations:
1 kietėjimo proceso eksperimentas
180 degrees 30 minutes basically appear watermark boundary, 200 degrees 10 minutes effect is also better than 180 degrees 30 minutes effect. So the temperature and time is quite key, especially in the case of heat will fade the coloring way, must be integrated to weigh the curing process and color.
2 apsauginės plėvelės klampumo ir vandens purškimo eksperimentas
There were watermarks 24 hours after spraying film for both high viscosity and medium viscosity, while there were almost no watermarks 24 hours after spraying film for low viscosity. It shows that the viscosity of the membrane has a great relationship. But there is a phenomenon, if sprayed with pure solvents such as alcohol, there is no watermark on any viscosity. The author cannot find a reasonable explanation for this phenomenon. I'll leave that to the right person.
3. Problemos su elektroforezės bako sprendimu
Tai, kas išdėstyta aukščiau, yra tik iš rezultatų analizės, tačiau problemos sprendimo būdas kitoje gamykloje verčia autorių atpažinti pagrindinės problemos kryptį.
It is also a watermarking problem, but the delivery is urgent, and the change of low viscosity protective film is not guaranteed to be a problem, but also to observe the time. The workshop director decided to rearrange the electrophoresis tank. (Pull out to empty slot, can be added later). The process was not changed and the problem disappeared. I can't remember any new grooves having similar problems.
Toliau pateikiama tik išvada. Šiuo metu autoriui priklausanti įranga negali palaikyti patvirtinimo.
In electrophoresis, only the solvent can not be tested. It can be inferred from the above phenomenon that the solvent is reduced, and the principle of recovery equipment is to filter water and solvent from the main tank to water washing, and the solid components of water washing return to the main tank, and achieve the purpose of recovery. The volatile nature of the solvent and the lack of laboratory equipment, resulting in the failure to quantify the proportion of solvent imbalance.
Tirpiklio disbalansas gali pakenkti dažų plėvelės kompaktiškumui ir vienodumui, todėl vanduo gali patekti į dažų plėvelę, todėl gali susidaryti vandens ženklas.
Apibendrinkite pirmiau nurodytus tris punktus, tikiuosi, kad panašius atvejus galima palyginti, kad būtų nustatyta problema.




